G-SSL Frontpanel (Standard)

42,88€ (incl. 19%VAT)

Frontpanel for Gyraf G-SSL (standard) 42,88€ (incl. 19%VAT) 0-20dB meter is available here
Frontpanel for Gyraf G-SSL (standard) 42,88€ (incl. 19%VAT) 0-20dB meter is available here

-3mm black anodized frontpanel
-meter cutout for the meter shown below

-drillings for the enclosure whown below

-different meter cutouts for any meter is available

-the edgewise meter which will fit into the frontpanel is available here for 17,20€ (incl. 19%VAT)


G-SSL Frontpanel (with Sidechain)

45,27€ (incl. 19%VAT)

Frontpanel for Gyraf G-SSL with Sidechain 45,27€ (incl. 19%VAT) analog dB meter, available here
Frontpanel for Gyraf G-SSL with Sidechain 45,27€ (incl. 19%VAT) analog dB meter, available here

-3mm black anodized frontpanel
-meter cutout for the meter shown below

-drillings for the enclosure whown below

-with Sidechain function

-different meter cutouts for any meter is available

-the edgewise meter which will fit into the frontpanel is available here for 17,20€ (incl. 19%VAT)


G-SSL Frontpanel (with Sidechain and TL,TM)

(SUPER SIDECHAIN)

45,71€ (incl. 19%VAT)

Frontpanel for Gyraf G-SSL with Sidechain and TL, TM function 45,71€ (incl. 19%VAT) analog dB meteter is available here
Frontpanel for Gyraf G-SSL with Sidechain and TL, TM function 45,71€ (incl. 19%VAT) analog dB meteter is available here

-3mm black anodized frontpanel
-meter cutout for the meter shown below

-drillings for the enclosure whown below

-with Sidechain function and TL, TM settings

-different meter cutouts for any meter is available


G-SSL Frontpanel (with Turbo Switch)

42,58€ (incl. 19%VAT)

Frontpanel for Gyraf G-SSL with Turbo Switch 42,58 (incl. 19%VAT) analog dB meteter is available here
Frontpanel for Gyraf G-SSL with Turbo Switch 42,58 (incl. 19%VAT) analog dB meteter is available here

-3mm black anodized frontpanel
-meter cutout for the meter shown below

-drillings for the enclosure whown below

-with Turbo Switch Hole

-different meter cutouts for any meter is available


Serpent Audio SB4000

51,14€ (incl. 19%VAT)

-3mm black anodized frontpanel
-cutouts to SB4000 specifications

-you have to cut a small piece of the bottom enclosure part yourselfs so that the meter and the power switch fits

-round cutouts for push switches as standard (but I can make rectangular holes so that the nrg push switches will fit)

 


G-SSL Frontpanel with Pushbuttons

61,06€ (incl. 19%VAT)

G-SSL Standard Pushbutton-Version (cutout for the 0-20dB meter which is available here)

Frontpanel original Style  50,72€ (incl. 19%VAT) for Sifam knobs and NRG-pushbuttons

-3mm silver anodized frontpanel with black text

-meter cutout for Sifam PPM14 (any other meter cutout is possible)

-drillings for the enclosure shown below (panel is available with no enclosure drillings if you want to use your own enclosure)

-the edgewise meter which will fit into the frontpanel is available here for 17,20€ (incl. 19%VAT)

 


G-SSL Standard Pushbutton-Version + cutout for the "SSL style db meter" (same meter which is availabl ein my shop and from hairball )

G-SSL with cutout for the "Modern VU Meter Led (GSSL DIY) (available from micandmod.com)
And illuminated push switches which are available here.

61,06€ (incl. 19%VAT)

Meter cutout for 8027B Meter (available from hairball audio or micandmod) and the nrg-switch


G-SSL Sidechain Pushbutton-Version (edgewise db meter)

61,06€ (incl. 19%VAT)


G-SSL Sidechain Pushbutton-Version (SSL style db meter)

61,06€ (incl. 19%VAT)




The NRG pushbutton

NRG pushbuttons 12,95€ (incl. 19%VAT) per pushbutton including LED, Lense, switch socket

Iluminated pushbuttons like they're used in analog consoles
You can remove the lense cover and add a piece of paper/transparency film with your own text
Maximum Voltage: 250V AC  Maximum Current: 3A  With LED (2V)
These pushswitches need a rectangular cutout. The advantage is that they cannnot move around like the round eao Switches, they always stay in place. Good! :-)
A socket is already included. So you can solder cables to the sockets, not to the contacts direclty. This makes it possible to simply change the switch without desoldering the wires. You can also use the socket to solder it into a pcb.

The rectangular cutout in the frontpanel for these switches is 17mmx17mm.

12,95€ (incl. 19%VAT)


             Switch socket, Switch, Switch in Switch Socket                                           Lense with removable paper sheets


you can solder any different coloured LED to the socket            or you can make a momentary switch out of it by removing
blue led, white led, red led, purple led... whatever                        the smal metal clip


                         G-SSL with NRG pushswitches                                                                        closeup of the switches


                      Pushbuttons on sockets soldered to a pcb                                                           pushbutton pcb

You can use these switches with your G-SSL, no pcb needed. Wiring diagram is shown below.

Download
SSL_switch_wiring.pdf
Adobe Acrobat Dokument 47.2 KB



Download
pdf Download for the IEC Connector (Wiring Diagram)
IEC connector.pdf
Adobe Acrobat Dokument 573.4 KB

Edgewise db meter (for G-SSL)

24,30€ (incl. 19%VAT)

  • with db scale from 0-20dB
  • black needle
  • including black screws
  • you can put a LED for illumination on top of the meter yourselfs if you want
Classic db meter
Classic db meter

Information about vu/db meter cutouts:

Every panel is built to order. The 20dB meter iam showing here will fit in all G-SSLs. But I can make a cutout for every meter you want. For example the original Sifam PPM14, the Sifam AL19, or AL19WF (with bezel) or the chinese hairball meters.


 

 

Pictures of a complete unit with frontpanel, rearpanel, enclosure, db-meter (not available anymore)